Instructions to setup Compact single feed label printers for WinPawn 
=====================================================================

10/07/05 - Thermal Windows XP printers - Portrait Orientation
=============================================================
1) Copy the enclosed ITEMLBL1.LBX, ITEMLBL1.BLT ADDRSLB1.LBX AND
ADDRSLB1.LBX files over the same ones in your WinPawn directory for
every WinPawn workstation. These files control the single label
printing operation.

2) Install the latest manufacturer printer driver. The manufacturer
usually has more software with the label printer, but you only need to
install the windows printer driver - probably the best idea in order
to eliminate any extra software interfering with WinPawn.

3) (a) Change WinPawn File/SystemSetup/InventoryParameters screen to
have 1 "Labels/page" Leave the "Vert. spacing" as is. Select the abel
printer driver you have installed as the label printer in the
File/SystemSetup/WorkStationSetup screen.

(b) For Workstations that are not connected to the printer directly
you need to (I) setup the printer for windows Sharing (II) instal the
shared label printer on the workstation ("Add Printer") and (III)
select the network label printer as the label printer in WinPawn.

This should work with the normal 1 x 3.5" (or wider) labels that come
with the printer.

If it does not you may need to try different paper sizes in Windows
printer setup.

========================================
Abri Technologies - http://www.abri.com/
